MIG 17

For cutting granite, reinforced concrete, natural stone and really hard materials

The MIG 17 is for cutting granite, natural stone and a massive range of hard materials.

The MIG 17 is part of Diewe’s superior Premium 7 Range.

Design

It outlasts many other blades, even when used to cut very hard materials such as granite, natural stone and reinforced concrete.

It has a massive segment height of 17mm of high quality diamond grit.

The segments are laser welded for extra strength.

Long life-span

Laser welded 17mm segments give you a stronger blade. Stronger blades last longer.

The blade also lasts far longer because it has 30 degree gullets. These clear the debris away from the blade and cutting area faster.

When more air is trapped at the cutting edge of the disc, the temperature is reduced during use so that the blade doesn’t warp or crack.

Cuts a massive range of really hard materials like natural stone

The 17mm segments are laser welded to the disc so that they are stronger and cope with higher temperatures.

The segments are covered with high quality diamond grit so that the blade will cut far harder harder materials, such as granite than most blades on the market.

Applications

• construction materials
• concrete
• reinforced concrete
• granite
• all types of bricks
• natural rock.

SIZES

• 9″ for hand-held angle grinders and dry use
• 14″ for wet use on table saws

Similar blades are the Tsunami disc and the Master Drive Turbo and possibly the XLS Turbo.